Dik Geurts

Instyle 550EA

HETAS ID:	E22293
App. Type:	Roomheaters
Fuel Type:	Wood Logs, -
Certificate Ref:	AA-2019-04/03
Std. Tested to:	EN 13229:2001+A2:2004
Hearth Req:	Constructional

Manufacturer Address:	DRU Verwarming BV, Ratio 8, Duiven, The Netherlands, NL-6920
Manufacturer Email:	purchas_invoices@drufire.nl
Telephone Number:	(+) 31(0)26 319 5 319
Website:	https://www.drufire.com/en-gb/product-range/dik-geurts/instyle-prostyle/instyle-550-ea

Performance

HETAS has audited and verified that all applicable clauses in the test report have been passed in respect of the materials, design, and construction in accordance with the relevant BS EN type test standard for the appropriate technology, performance criteria of which is below;

Nominal Output - Wood Logs	4.9KW
Net Efficiency - Wood Logs	81.0%
Gross Efficiency - Wood Logs	73.7%

Environment

In support of reducing the impacts of particulate emissions on the UK's overall air quality targets, HETAS “Cleaner Choice” appliances have been independently verified as exceeding the current requirements for UK smoke control areas for particulate matter, including PM2.5's by 50% of that required by DEFRA;

90%

Improvement on Clean Air Act Particulate Limit – Full Load

81%

Improvement on Clean Air Act Particulate Limit – Part Load

Safety

The product certified has been assessed for its suitability for installation in domestic properties against the requirements of the Building Regulations and appropriate standards. The performance of the appliance has been verified as meeting the following technical performance attributes;

Combustible Clearances - Rear	300 mm
Combustible Clearances - Side	200 mm
Hearth Temperature	> 33.0
Appliance Spigot SIze	125 mm
Minimum Flue Diameter	125 mm
Recomended Flue Draught	12Pa
External Air Supply Compatible	*Yes
Tool Required for Refue/De-Ash	Yes
Flue Draught test Point	No

*HETAS product approval is not valid for appliances fitted with an external air supply ducted directly to the appliance. The installer should reference HETAS technical note TN_0020 General Guidance for the Installation, Risk Assessment & Commissioning of Solid Fuel Appliances with a Dedicated External Air Supply for more information.

Technical Data

The purpose of this HETAS Stove Approval Scheme is to help consumers, retailers, installers and others to identify stoves with lower particulate (PM) emissions. There are concerns that small particle emissions known as PM2.5 to PM10 can be harmful. For that reason, we are operating a scheme which only accepts appliances that are tested to emit lower emissions compared to the current legal requirements. We have chosen to set the bar for entry at 50% less emissions than required for exemption for use in smoke control areas in the UK. We also note that Ecodesign legislation has differing, but important limits for other emission and any appliances listed here must meet those requirements as well as exceeding the particulate emission values for exemption by at least 50%.

Additionally, the product certified has been assessed for its compliance against the legal requirements for emissions and efficiency stipulated within the Ecodesign regulations. The performance of the appliance has been verified as meeting the following environmental attributes;

PM - Wood Logs	27 mg/m3
OGC Emissions - Wood Logs	85 mg/m3
CO Emissions - Wood Logs	1079 mg/m3
NOx Emissions - Wood Logs	129 mg/m3
Seasonal Efficiency - Wood Logs	71.0%
Energy Label Ratings	A+

Technical Downloads

Instruction Manual Reference	Instructions for Installation Instyle 500,550, Prostyle 500,550 - DRU-409050-NL-NL-0918-13-01.09.2018-DRU-409050-NL-NL-0918-13
DoP Cerificate Referece	Instyle 500EA DoP - 100-80401-00